Android (Generic)

Note: There are many Android media players available, ranging from residential to commercial-grade devices. We recommend testing Fusion Signage on your device to ensure compatibility with your needs.

Setting Up Fusion Signage on an Android Device

This guide assumes you're installing on a new Android unit running Android 4.4 or higher with the factory bootloader intact.

Required Equipment:

  • USB mouse and/or keyboard

  • USB memory stick with the latest Fusion Signage APK, or download the APK directly via the device browser at https://fus.app/a.apk

  • Active internet connection

Important Considerations

Older devices may not support the latest app version and could show a parsing error. If so, try installing this version:

  • https://assets.fusionsignage.com.au/releases/android/2.3.8/fusion-app-release-v2.3.8.apk (supports Android 4.4.4+).

Always test the installation process on your device before deploying to customer hardware.

Device Configuration & Installation

1. Auto Boot on Power (Optional)

  • If your device automatically starts when powered, skip this step.

  • If not, find MCUSetting in Android’s Settings menu and enable "Enable auto start system when plug in."

2. Enable Unknown Sources

  • Go to Settings > Security

  • Turn on "Unknown sources" to allow installation of apps outside the Google Play Store.

3. Root Access (if needed)

  • Rooted devices: Use SuperSU to grant root access:

    • Open SuperSU

    • Navigate to Settings, then set Default Access to Grant

  • Note: Rooting may be required for automatic updates or specific features.

4. Set Correct Time & Date

  • Go to Settings > Date & Time

  • Set the correct timezone, date, and time.

  • Important: The device’s time is used for security identifiers and scheduling. Incorrect time may cause issues.

5. Connect to the Internet

  • Configure WiFi or Ethernet in Settings > Network

  • Recommendation: Use wired Ethernet where possible for stability

  • If using WiFi, ensure a strong, reliable connection.

Installing Fusion Signage

1. Using USB

  • Download the APK at https://fus.app/a.apk or copy your pre-downloaded APK to a USB stick.

  • Insert USB into your device

  • Use File Explorer to locate the APK on the USB

  • Tap the APK to install

  • Once installed, tap Open to launch Fusion Signage

2. Downloading via Browser

  • Open the device’s browser and go to https://fus.app/a.apk

  • The APK will download to Downloads folder

  • Use File Explorer to find and tap the APK

  • Follow prompts to install

  • Tap Open to launch Fusion Signage

Connecting & Configuring

1. Find Your Identifier

  • After launch, if you see a 6-digit identifier on the screen, your device is ready.

  • Enter this identifier in Fusion Signage Portal > Screens > Add Screen to link the device.

2. If No Identifier Appears or Shows Offline:

  • Ensure device is connected to the internet via Ethernet or WiFi.

  • Confirm correct date & time are set.

  • If issues persist, check network connectivity and device settings.

3. Touchscreen & Menu Settings

  • By default, touching the screen opens the Fusion Signage menu.

  • To prevent accidental menu access, enable "Menu Secure Access" in device settings:

    • To access, tap the screen 5 times quickly instead of once.

4. Additional Settings

  • Use the menu (via touch, remote, or mouse) to access options like WiFi setup, date/time adjustment, orientation, custom LED resolution, offset settings, auto-boot, and auto-update.

Finalise Setup

  • Power cycle the device: unplug, wait 10 seconds, then plug back in.

  • If the device automatically boots into Fusion Signage and appears online in your portal, setup is complete!